Item description for Bigfoot Edition Decal fits -Subaru- Cross-T 7" long Big foot Sasquatch sticker

Oracal Vinyl Decal

Choose your size above for your Die Cut Decal 7" long

Professional Oracal to 6-8 Year Fade/Waterproof Vinyl

No background in any of these decals.

They are professionally die cut, so the surface you applied it to, is the background

Apply with our Professional CLEAR (easy to see through) Application tape for easy placement

Instructions included below for an easy trouble free application

Shipped First Class Stamped Mail (with tracking)

USPS First Class shipped fast

Priority Mail Service or First Class Package is selected for shipping at checkout

Other sizes and colors available / "Contact Seller" link is at the top of this page.

Step 1 – Clean the area thoroughly with rubbing alcohol or soap and water.

How to Install a decal

Step 2 – Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape.

How to Install a decal

Step 3 – Carefully peel the white paper backing off the sticker.

How to Install a decal

Step 4 – Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.

How to Install a decal

Step 5 – Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

How to Install a decal

Please note, we can accept large orders and mass produce decals. But, it may take additional time to complete the order depending on how big the order is. Please contact us for an estimate for large jobs. Thank you
Returns will be accepted(Buyer pays shipping) for UNUSED and NEW decals. If within 30 days you decide you want to return your decal exactly the same as received( NEW and UNUSED) please send it back and let us know it is being sent back. Under no circumstance will used or damaged decals be accepted for return. Do not send back a used or damaged decal as you will not be refunded. Thank you
For SMALL decals.....If you order smaller decals, say under 4", please keep in mind some of the detail will be lost due to the small size. Small decals may not look exactly like the picture of the large decal. Also, with small decals, you MUST be 100% sure to clean the area prior to applying your small decal. Since the decal and details of it are so small, you will need a perfect surface in order for it to stick correctly. Please message me prior to ordering for any questions and I will get back to you ASAP.

Also, be please aware that the color of the decals may vary. Please request a pic of the actual vinyl used if you would like to get the best estimate.

Thanks again

FOR DECALS Looking for a magnetic sheet backing https://www.ebay.com/itm/153588921467
RETURNS -- We offer free returns on all unused and undamaged items in the original condition as received. No returns honored for damage occurring during installation. We are not responsible for improper use or installation of items. Restocking fee of 15% may be deducted from your return if altered. No returns for ANY custom items.
feedback

Thank you very much for your business. Here are a few instructions for you to have a successful decal install. Installing decals is challenging so please take your time and let us know if you need help BEFORE install if you are unsure.
Please prepare your decal for install after shipping. During shipping your decal may be subjected to severe heat or cold and rough handling.   The longer the distance, the greater the chance for issues.
For large decals it can be very difficult to install them correctly. There may be some wrinkles in the TRANSFER TAPE, but don?t worry the decal is still good. This is very common from being rolled up and shipped. Just follow the directions below to get rid of as many bubbles as possible.   We always recommend using a professional decal installer if you are not skilled in the art of decal installation.
Pre install tip: Lay your decal on a flat surface in a warm environment. Gently lift the transfer tape and with a squeegee or credit card gently press out the wrinkles from shipping. There may some wrinkles in the transfer tape due to shipping but press them out gently the best you can and it will not affect the install. Just be sure decal in laying flat on backing.
Step 1 ? Clean the install area thoroughly with rubbing alcohol or soap and water.
Step 2 ? Prepare the sticker for application by firmly/carefully rubbing a squeegee or credit card across the clear transfer tape. Slowly lift the transfer tape to ensure the decal is attached. If the decal is not attached, use a razor to gently lift the decal up along with the transfer tape. Do this for all parts of the decal not attached to the transfer tape.
Step 3 ? Carefully peel paper backing off the sticker. If any part of the decal is not attached to the transfer tape, use a razor to help lift the decal onto the transfer tape.
Step 4 ? Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. USE water/soap mist to assist in install. *For larger decals please refer to attached
Step 5 ? Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
FOR CARBON FIBER Please take extra care as carbon fiber does not stick well to the transfer tape. Go slow and take your time to avoid mistakes with installation. Use heat and press firmly on WELL CLEANED surface after install.
GLOW IN THE DARK Please make sure to follow the steps above as well as using heat after install to secure it to the surface. ALSO: Glow in the dark requires light source to glow. Shine light on it, then it will glow for a short time. It will not glow without light stimulation.