BRAND NEW

44-0154

LAUNCH CONTROL SWITCH

YAMAHA


YZ450F, YZF450 2016-2019,,

- 4 WIRE / 1 OEM CONNECTOR.
- WIRE LENGTH 70CM. W/ LED.
- Fits without any modification plug straight on.
- Meets or exceeds OEM quality.

 Fitting Instructions 

  • Start by removing the front number plate.
  • Carefully snip any cable ties holding the start and stop switch cables to the bars then un-screw the clamps and let these hang down.
  • Locate the connector for the switch on the bike, these are often close by to the headstock on the chassis but sometimes can be under the tank.
  • Unclip the connector and remove the switch taking a note of the routing for the wiring.
  • Clean the connector using contact cleaner such as Maxima Electrical Contact cleaner.
  • Loosely attach the new switch on to the handlebars in the desired position.
  • Route  the wires as per the old switch and clip the connector together.
  • Check all free pay in the wires by turning the bars to full extension and making sure the wires don’t pull tight, adjust if necessary.
  • Re-fit cable ties to the wires if possible positioning the cables to the back of the bars to prevent damage from roost.
  • Re-fit your number plate.


post is from portugal by standard airmail


we send more expensive items by tracked registered airmail

DELIVERY DATES ARE ESTIMATES AND NOT GUARANTEED DATES

DELIVERY TIMES ARE ALL ESTIMATES
europe approx 5-16 working days
rest of the wrorld  5-30 working days

for any item delayed,we must allow 21 working days for europe and 30 working days for rest of the world before we can deem as lost.

PLEASE NOTE THE DELIVERY TIMES BELOW IN THE LISTING GIVEN BY CTT PORTUGAL , WE SELECT ECONOMY TO USA ONLY TO ALLOW EXTRA TIME FOR ANY POSSIBLEDELAYS WHICH MAY COME UP IN THE PANDEMIC FROM TIME TO TIME.GENERALLY DELIVERIES ARE GOING THROUGH NORMAL.