Shipping Alert! USPS deliveries are experiencing significant delays.  As a result, we are now offering shipping by FedEx and UPS.  If your order is time sensitive we highly recommend using FedEx or UPS for your delivery.

We messed up and now you can save big on 5-Packs of sandpaper for your BOSCH GSS20-40 Sander!

Once in awhile production errors occur and we just had one. The holes on these sanding sheets just don't line up as well as we would like! The sanding surface itself is fine and most of the through pad dust evacuation holes are only partially covered.

What this means is that you can now get 5 Sheet Packs of premium sandpaper for your sander that will sand extremely well at a fraction of the normal cost.

Stock up today because quantities are limited!

Sanding Sheets are 1/4 Sheet (4.5x5.5") in size, pre-punched and work on the BOSCH GSS20-40* 1/4 sheet sander

Our Sanding Sheets Offer Unmatched Sanding Performance and Grit Selection
  • 'Stay Put' No-Slip design provides enhanced gripping for reduced sandpaper slippage on Hook-and-Loop compatible sanders. This is a true Clamp It And Forget It solution
  • 'Place and Clamp' mounting method means no more fussing around trying to get the sandpaper even under each retention clamp. Simply place the sanding sheet on the bottom of the sander, aligning the dust collection holes with the pad holes, and clamp.
  • Sanding Sheets are made with Aluminum Oxide for longer lasting sanding performance
  • Wide variety of grits insures you have the right sanding sheets for every project

*BOSCH GSS20-40 Sander shown on any digital images is for reference purposes only and is not included with the sale of the sandpaper bundle

Note: Sandpaper Bundles arrive in bulk packaging only

Buyer only pays actual shipping

Grit Coarseness Guide

Coarse - 40 Grit - Good for fast removal of material

Medium - 60 to 80 Grit - Good for sanding bare surfaces in preparation for finishing and for removal of previous finishes

Fine - 100 to 120 Grit - Good for additional preparation of surfaces before applying finishes

Very Fine - 150 to 220 Grit - Good for final preparation of surfaces before applying finishes

Very Fine Finish Sanding - 240 to 320 Grit - Good for sanding finishes between coats

Extra Fine - 400 to 600 Grit - Good for initial polishing of finishes

Super Fine - 800 to 1200 Grit - Good for final polishing of finishes

Ultra Fine - 1500 to 2000 Grit - Good for final polishing of thick finishes