Original Quick release plate for MX3000 Tripods from Targus Target Walmart etc.Original Quick Release Plate for the MX3000 Tripods (sold by Targus, Walmart, and Target)Please Carefully note: when measuring down into the receiver section or quick release platform, it should be 44mm wide or 1 5/8". If the width inside the receiver is 39mm or 1 3/8", then you will need a different plate. Most Important: the model MX3000 that you own, should be BLANK when looking down into the receptacle (where the quick release goes). It should NOT say anything! See Photo above. Normally your tripod will have a round yellow bubble level on top, in front of where the QR goes in. Any questions or doubts, or if you need the # of the correct tripod quick release plate, please contact us. Base Dimensions: 39mm (bevel side) x 44mm on flat side Compatible Tripods excluding exceptions mentioned above):
Please be sure to measure your tripod receiver to be sure as some were made by different manufacturers with the same number.
Do you use your smartphone as a camera?
SATISFACTION GUARANTEED ![]() Powered by SixBit's eCommerce Solution |