Heavy Duty Disc Brake Piston Caliper Compressor Rewind Tool Set & Heavy Duty Ball Joint Press and U Joint Removal Tool Kit, Bundle
Specification
| Brand | Orion Motor Tech |
| Orientation | Rear |
| Vehicle Service Type | Car |
(n/a)
Item Description
- Bundle Include: A -- 24pcs heavy duty disc brake piston caliper compressor rewind tool set and wind back tool kit for brake pad replacement reset, fits most American, European, Japanese autos. B -- Heavy duty ball joint press & U joint removal tool kit with 4x4 adapters, for most 2WD and 4WD cars and light trucks.
- A1 -- For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies. This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
- A2 -- Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics. Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
- B1 -- Use the OMT Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle. OMT sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
- B2 -- Fit most American domestic and imported 2-wheel drive (2WD) and 4WD cars and light pickup trucks that have press-fit type ball joints, include 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles). Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
Product Description
#0 General Motors, Cadillac Seville, Eldorado
#1 Retainer Plate
#2 Citroen XM, Xantia, Others
#3 Alfa Romeo; Audi; Austin; BMW 318iS, 320i, 325 TD, 518i, 525i, 740i, 850ci, M5; Ford Fiesta; Honda Concerto; Jaguar XJ6, XJ40; Mercedes-Benz 190, 200, 300, 420, 560; Mitsubishi Colt; Nissan
#4 Alfa Romeo 164 2.0; Chevrolet Lumina; Fiat; Ford Telstar, Laser; Honda Prelude, CRX; Mazda; Pontiac Grand Prix; Saab 9000; Saturn; Subaru
#5 ⅜″ Square Drive / #6 Nissan Primera, VW Golf 4
#7 Audi 80, 90 V8 and 100 Coupe; Buick GS, GSX; Ford Sierra ABS, 1985 Granada, 1985 Scorpio; Honda Prelude; Nissa Silvia 1.8 Turbo; Blue Bird Primera 2.0i, LS; Rover 8000; Saab 9000; Subaru L
#8 General Motors / #9 General Motors Cadillac Seville & Eldorado / #10 Volkswagen
#A Chevrolet Laguna; Renault R21 / #E Nissan Cefrio, Maxima
#F Opel Corsa, Astra, Zafira ,and Vectra
#K Citroen C3, C5 / #K1 Citroen / #K2 Citroen / #M Ford
#N Renault; Saab; Honda / #O Retainer Plate
LH Left Thrust Bolt Assembly
RH Right Thrust Bolt Assembly
Superior-Strength SteelThis kit is constructed from structural-grade 1045 steel to offer outstanding strength and durability. | Antirust CoatingEach component is sandblasted and coated with a VCI antirust oil for long-term corrosion-free performance. | Exacting EngineeringHighly precise forging and molding help these parts work effectively without damage to your brake pistons. |
Orion Motor Tech Ball Joint Tool with 4-wheel Drive Adapters is a heavy duty forged steel tool and set that is for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins, even removing rusted and corroded parts. This set contains a C-frame press, 3 receiver tubes sizes: 2-3/4"x3", 2-1/4"x 2-1/2" & 1-3/4"x2", installation and removing adapters. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
Still looking for a long-lasting ball joint press tool?Our tool made of ultra carbon steel, these components will stand up to heavy use and accidental drops. It's even for professional mechanics. | Afraid it might not be compatible with your vehicle?No worries. Give it a try and if you realize you have one of the few vehicles that it doesn't fit, just let us know. | Are you a novice or is this your first ball joint replacement?Don't worry. We've included a detailed parts diagram and step by step instructions to make the piston wind-back process smooth. |
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.