Original OSN Quick Release Plate for the MX2000 (sold by Targus, Walmart and others) Tripods
Please Carefully note:
Please be sure to measure your tripod receiver to be sure as some were made by different manufacturers with the same number!!!
When measuring down into the receiver section or quick release platform (where the plate goes), it should be 44mm wide or 1 5/8".
If the width inside the receptacle is not ~39mm or 1 9/16" (meaning your is larger), then you will need a different plate.
The model MX2000 that you own should be BLANK when looking down into the receptacle (where the plate goes).
It should NOT say MX2000P. See Photos.
If your tripod does say MX2000P, I have that quick release plate available here https://ebay.com/itm/332689468911
Normally your tripod will have a round yellow bubble level on top, in front of where the QR goes in.
- Base Dimensions: 39mm (bevel side) x 44mm on flat side
- Top dimensions: 40mm x 63mm
- includes camera alignment pin
- Targus MX2000 tripod
- Walmart MX2000 tripod
- OSN MX2000 tripod
Any questions or doubts, please contact us.
A quick release plate will attach to the camera's tripod mount and allows you to quickly and easily attach or remove the camera from a compatible tripod without having to waste time fumbling with the threaded mount.
Having the same number of quick release plates as the number of cameras and/or large telephoto lenses in use allows you to leave one on each, enabling the rapid change of equipment with minimal fuss, essential for the professional or advanced amateur photographer. Always good to have a spare
(plus you'll SAVE Up To 15% or more on your entire order if you buy 2 or more today! )
Do you use your smartphone as a camera?
If you would like to attach it to your tripod, we also have a Tripod Cellphone holder Smartphone adapter in our store here https://ebay.com/itm/333786782365
| FEEDBACK | FROM | WHEN |
|---|---|---|
|
Item was exactly as described and sent very promptly. As others have mentioned, this seller provides detailed descriptions of tripod quick release brackets so you can find the one you need. Worked like a charm! This was the only seller I found that provided an item description detailed enough to ensure that you were ordering the correct one.
|
Past month
|
|
|
Item description was so specific that I knew it was the one I needed.
|
Past month
|
 |
Item exactly as described. Fast shipping. Recommend this Seller! | Buyer: | |
| Original Quick release plate for MX2000 Tripod sold by Targus Target or Walmart (#332689469007) |
) |
A++++++++This item was perfect and just what I was looking for | Buyer: | |
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
|
Was exactly what i needed. I'm a happy customer. | Buyer: | |
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
) |
Quick shipping even to Alaska! A good seller. | Buyer:
backroadbus ( 314
 )
|
|
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
|
As described and on time. Thanks again | Buyer: | |
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
|
Item was exactly as described and fit perfectly into tripod base! TY!!! | Buyer: | |
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
|
Perfect! Fits this old tripod like a glove. Saved it from the trash. | ||
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
 |
Amazing seller, very fast communication and just as fast shipping! Thanks! | ||
| Original Quick release plate for MX2000 Tripod (Targus Target or Walmart Tripod) (#332689469007) |
AUTHORIZED DEALER
SATISFACTION GUARANTEED
Thanks, Owen (okdnet-emporium)
