US Warehouse - FREE & FAST Shipping in USA

Product Description:

• Piezo igniter with ground terminal (keep flat terminal in contact with metal at all times)
• 200℃ resistance wire, 1m long
• Set of 2 (if you can't get it to work, send an email and we will send an operation video)
• Voltage over 20kV, lifespan: over 35,000 times
• Installation instructions: keep the ceramic pin around 5mm from the burner hole, or it may not ignite the gas
• Product: DIY piezo igniter kit (2 pack)
• 39.4" long lead without earth wire (not universal)
• Product packaging: 2 sets of piezo igniter with ceramic spark ignition electrode
• Wire has heat resistance coating for safe use and is long enough to reach from the farthest burner to the electronic ignition box
• Can be used in gas stoves/ovens, fireplaces, patio heaters, wall furnaces, gas boilers, or as outdoor barbecue replacement parts
• Piezoelectric igniter length: 85mm, cap diameter: 26mm, spark plug igniter output voltage: ≥18kV
• No battery needed, simply press for one spark to ignite
• Lifetime: over 30,000 times
• Note: electrode tip must be installed no more than 1/4 inch from the edge of the burner
• Keep the distance between the ceramic pin and the burner hole within 5mm, or it may not ignite the gas

 

Item Weight	2.46 ounces
Is Discontinued By Manufacturer	No
Package Dimensions	5 x 2.8 x 0.8 inches
Manufacturer	MNS