ATR Tile Leveling Alignment System 100 2mm

Floor only Cross Spacers 2mm

The floor spacing plate with its patented blade design is created to flex and accommodate structural movement.

Apex Coverage Area - 100 sq ft compare at 25 sq ft with other leveling system at $85.90

Tiling made easy with the ATR Tile Leveling

In stock - Ship Same Day

Grout spacer 3/32" (2mm) - Tile thickness 15/64 - 51/64 (1/4 - 3/4) (6mm-18mm)

You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System

While every other system require 376 units for 100 pieces of tile ATR require only 117

Very easy to learn and use at any skill level

Advantages of the ATR Tile Leveling

Example of the different between ATR to other leveling system

100 pieces of tile project ATR use total of 117 spacers with approximately cost of $29.99 compare to any other leveling system 376 spacers with cost of $44.00

About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 259 pieces

How to use 3 Easy steps

1. Spread thinset install tile

2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.

3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Re-usable spindle once tile adhesive is dry.

ATR Leveling System, ATR Plastic, Tile leveling, lippage free, flat surfaces, Leveling System,

Click Here to watch ATR Video's

ATR Leveling System Comparison Chart

ATR Leveling System Questions and Answers

Free or Paid Shipping cost are for the lower 48 states Only. Any order submit not from lower 48 states will be refund and will not be shipped unless extra shipping cost paid. Other state please contact us at flooringsupplyshop.com for shipping cost