Click on the below images to view enlarge
When you're traveling, going sightseeing, or just out and about, it is useful to have gadgets that are there to make your life easier. Taking selfies by holding the phone is pointless when you can use the monopod to provide stability, security and support! UNIVERSAL PHONE HOLDER SUITABLE FOR MULTIPLE DEVICES: You can use the universal phone holder (clamp) for any device up to 3.25" in width
PLUG AND PLAY:
NO Battery, NO Charging, NO Remote Control, NO Bluetooth!
EASY TO USE:
Even as a beginner selfie taker, you will have no problem getting the hang of using this monopod. The stick comes in handy for any occasion, and comes with an arm band for safety and security. LIGHT AND COMPACT - WILL EASILY FIT IN YOUR BACKPACK OR PURSE: Ideal for a spontaneous selfies - at only 11" long when retracted, this stick stores conveniently into any small bag.
FULLY ADJUSTABLE EXTENSION 10" - 38":
Adjust the length of the selfie stick to get the perfect shot. Use a short length for intimate shots and a longer length to cram in more people or background. The clamps are adjustable to fit the desired angle for each shoot. Shooting different angles for photos and videos has never been as much fun and easy! Adjustable ball head and thumb screw locks for multiple angle shooting with 180 degree position.
Perfect for vacations, birthday parties, celebrations and simply for any occasion that requires capturing a memory. Now you can be part of every shot you take. The solo traveler can say good-bye to hundreds of pictures of landmarks and wait you don't need to bother someone else to capture that moment. Can be used and is compatible with iPhones, Androids and Smartphones.
Instructions for iPhones:
1) Put the cell phone into the phone clamp
2) Attached the mobile phone clamp to the monopod and tighten the screw
3) Stretch the monopod
4) Launch the cell phone camera application
5) Point the camera and press the shutter release button on the handle to take photo
Instructions for Androids OS including Samsung Galaxy, Sony, HTC, etc...:
Note that the Android OS is an open system with no unified standard. Some mobile phone manufacturers use the standard Android OS but others modify it to their own preferences. Even the same brand of may use different versions of the Android OS on different models in their line. The monopod supports most of the mainstream Android systems of release 4.2 or higher.
Please try the following steps if you have issues.
On Samsung phones, open the Camera Settings and change the function of the Volume button to Camera / Capture. (if this option is not available on your phone, please download Camera360 Ultimate app to access this feature)
1) Open the Camera
2) Click on the Gear icon to access the settings
3) Click on the Volume Key
4) Select the Camera Key option
5) Select "Capture" option
On other Android phones (with at least Android 4.0), use the free Camera360 Ultimate app. Download camera360 Ultimate from the google play store
Open the Camera360 Ultimate, go to Settings > Advanced settings.
Open the Volume functions.
Select > Capture
If the shutter release button on the monopod does not take a photo on your cell phone, please try the following:
Check to see that the monopod's plug is fully inserted into the headphone jack, especially if your cell phone is in a case. See if taking the phone out of the case makes a difference in the consistency of the connection.
Check the monopod with another cell phone to see if the monopod itself is working properly. IPhones work in default mode with the monopod, so that's the easiest one to use for testing.
Check to see that the buttons on the side of the phone are not being pressed down by the cell phone clamp.
Check to see that the "Press" button on rubber sleeve is making proper contact with the shutter release micro-switch underneath it. If it has rotated or shifted, gently rotate the rubber sleeve until it makes good contact.
|Diameter of inlet pipe||DN15|
|Diameter of outlet pipe||DN15|
|Water Pressure||0.05Mpa - 0.7Mpa|
|Power and Voltage||DC.6V AC.220V - 50/60Hz|
|Power Consumption||0.5MW 2W|
|Detection Zone||Factory set 25cm/10" (based on standard inductive board)|
|Ambient Temperature||1 - 45 ? / 33.8 -113 °F|
|Degree of protection by enclosure||1P56|
We take popular trends, simplicity of application and consideration of your family, and their needs, in the design of our products for the bathroom space. We consider safety issues as well as apply humanization in the design of our products. We strive to give consumers a considerate, comfortable feeling once our products have been put in place. We assure the highest product quality as a precondition and try to fully understand the needs of our consumers, and nurture these relationships with the consumers through the market, our sales and our pre/post-sale support in order to enhance and promote the complete bathroom update/renovation experience.
We store a large choice of varieties and this helps to customize experience that we bring to each user. At the same time we welcome bulk orders. Please contact us by e-mail with any questions and any orders, large or small.
1. Regularly clean the products in order to maintain the brightness of the finish as well as the functionality
2. Clean the product surfaces using only water and/or neutral detergents and then wipe dry with a soft towel
3. Pay attention to cleaning the products in even the concealed areas. This will prevent any residual buildup and keep the product looking and functioning like new
We accept all major Credit or Debit cards through PayPal.
Merchandise purchased may be returned for a refund within 30 days of the date of purchase if it meets the following conditions:
Refunds will be issued to the original form of payment, and we will deduct the shipping cost in sending you the goods from the refund.Return shipping fees are the responsibility of the buyer.
If you wish to receive a refund due to buyer's remorse (no longer needed), a 10% restocking fee will be deducted from refund total.
1. Sign into My Account
2. Select "Purchase History"
3. Locate order and navigate to the "More actions" drop down menu & select "Return this item"
4. Continue to follow the on screen instructions to complete the setup of your return with ASICS America
Please allow a minimum of 14 days for us to receive your item(s). All returns will be credited to the original form of payment within 6 business days of our warehouse receiving it. Please note that it may take 1-2 billing cycles for it to appear on your monthly printed statement. You will receive an email notification when we have finished processing your return.
Horizon Direct Depot reserves the right to make adjustments to the return policy.
Horizon Direct Depot does not currently offer exchanges via.
If we made an error on your order, please contact us immediately via Messages and we will be happy to assist you.
If your product becomes defective due to faulty materials or workmanship within a period of 1 year from the date of purchase, we guarantee to:
Your warranty is subject to the following conditions: