Use this sensor to detect when something or someone passes an entry point - a car entering your driveway, someone coming in the side gate, or any number of other uses. The sensor emits a beam of infrared (IR) light, invisible to human eyes, bounces it off a reflector, and senses when the beam is interrupted. The light sent out is polarized, so the sensor responds only to light with the same polarization. Input voltage can be anything from 12 to 240 volts, either AC or DC. The output is a relay capable of 0.6A at 110-125 volts, 2A at 30VDC. It's waterproof to the IP66 standard, so is built to take punishment outdoors. There are two LEDs to indicate proper operation.
Compatible with EMX-NIR Retro-Reflective Photo Eye
Model number |
E3JK-R4 series |
Supply voltage |
12-24Vdc; 90-250Vac; 12-240VDC/24-240VAC |
External dimensions |
18x50x50 mm / 0.7x1.9x1.9 inches |
Sensing method |
Retro-reflective |
Setting distance |
4m±10% |
Sensing object |
Opaque object |
Sensitivity adjustment |
Adjustable |
Response frequency |
25Hz |
Response time |
30ms max |
Control output |
3A@250VAC max, 10mA@5VDC min |
Protection circuit-DC |
Reverse polarity protection, Surge suppressor, Short-circuit protection |
Protection circuit-AC |
Surge suppressor |
Insulation resistance |
50 M? min. at 500 V DC between energized parts and case |
Dielectric strength |
1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case |
Temperature influence-1 |
±10% max. of sensing distance at 23°C / 74°F within temperature range of -25°C to 60°C / -13°F to 140°F |
Temperature influence-2 |
±15% max. of sensing distance at 23°C / 74°F within temperature range of -30°C to 65°C / -22°F to 149°F |
Voltage influence |
±10% max. of sensing distance in rated voltage range ±15% |
IP Rating |
IP67 |
Material |
Case: ABS; Sensing surface (lens): PMMA |
Operating temperature |
-30 to 65 °C / -22 to 149 °F(with no icing or condensation) |
Operating humidity |
Storage: 35% to 95% (without condensation) |
|