Elite 1500W Monoblock, Class A/B Amplifier
1500 W MAX Power 1 Channel
1125 W X 1 RMS @ 2 ohm
563 W X 1 RMS @ 4 ohm
Monoblock, Class A/B, MOSFET Power Supply
High and Low Level Inputs,
Variable Low Pass Crossover, Switchable Bass Boost
Include Remote Subwoofer Control
5 Years Elite Warranty
Dimensions: 10" L x 7" W x 2.5" H
2 Ohm Stable
The lowest impedance accepted by this amplifier is 2 ohms. Amplifiers that
are 2 ohms stable produce more power resulting in more volume. This amp can
comfortably power speakers or subwoofers with all channel(s) being used at a
load of 2 ohms.
Class A/B
Class A/B amplifiers have long been known for their ability to produce
great quality sound while performing more efficiently than pure Class A
amplifiers. We have developed a specific linear circuitry that further reduces
distortion while increasing both sound quality and power output.
High and Low Level Inputs
An amplifier with both high-level and low-level inputs provides flexibility
by allowing you to build an audio system using virtually any standard factory or
aftermarket source unit. High-level (speaker level) inputs accept the signal
from the speakers, while low-level (RCA) inputs accept the signal from the
pre-amp outputs of the source unit.
MOSFET
MOSFET stands for Metal Oxide Semiconductor Field-Effect Transistor.
MOSFETs are used either as a switch or to amplify a signal. MOSFETs are superior
to other FETs, because they require less current to operate, which makes them
better suited for car audio.
Protection
If the amplifier gets too hot, the thermal protection circuit turns the amp
off and allows the amp to cool down before turning it back on. If a speaker
fails causing an electrical short, the protection circuit will automatically cut
the output and remain in that state until the short is resolved. These safety
features give you peace of mind knowing the amplifier is constantly monitoring
conditions to protect itself.
Subwoofer Level Control
The ability to boost or attenuate the sub level when an amp and subwoofer
are connected to the subwoofer pre-amp output.
Switchable Bass Boost
Switchable Bass Boost allows you to boost the low bass +18db.
Variable Gain Control
Variable Gain Control lets you balance the amps output with the speakers or
subs the amp is driving. To much gain will lead to distortion and to little will
lead to clipping.
Variable Low Pass Filter
Variable low-pass filter gives you control over the frequencies that pass
through to the subwoofer.