Smiling Sun Wall Art Stencil - Customizable and similar items

Here Comes the Smiling Sun! Our large sun stencil will bring light and smiles into your kids room! It's a perfect addition to any nursery. So much better than a decal - you can customize your paint colors and re-use the stencil many times! Place it over the bed, table, sofa or anywhere you need a lil' sunshine! We are honored to design this stencil for Pavarini Design to be used in the Ronald McDonald House of the Greater Hudson Valley, Valhalla, NY at Westchester Medical Center for kids. ?? The focus of the kids room was in healing through color and light. This stencil comes in 2 overlays, to create a perfect seamless sun image. Please look at the diagram to see how it works. You at first stencil the 1st layer and then add the second layer, using the registration marks (3 little rays) to align the 2nd design. Since the stencil has large opening, we recommend using spray adhesive to help keep it in place, in addition to pieces of painter's tape. Also, if you want to minimize paint seepage or are using high contrasting colors, spray adhesive is very helpful (Elmer's spray adhesive seems to be the best). Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats. Note: you will still need to hold the stencil in place with a few pieces of blue painters tape! Adhesive by itself is not enough to hold the stencil on the wall. Clean-up tip: Spray the stencil with Simple Green to help to remove adhesive residue. You can stencil with acrylic or latex paint, stencil creams, fabric paint or glaze. Use a foam roller or stencil brush. Although our stencils do not require the use of spray adhesive, this pattern could benefit from it to help minimize paint seepage, especially if your walls have a slight texture to them. (Elmer's spray adhesive seems to be the best). Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats. Note: you will still need to hold the stencil in place with a few pieces of blue painters tape! Adhesive by itself is not enough to hold the stencil on the wall. Clean-up tip: Spray the stencil with Simple Green to help to remove adhesive residue. Please note that once you've used spray adhesive on your stencil, it will never really come off completely. That is why we personally prefer not to use adhesive, and instead use less paint on your roller or stencil brush. IMPORTANT INFO ON STENCILING TEXTURED WALLS: In general, it's possible to stencil over textured surfaces, however it depends on the roughness of your texture and your desired outcome. Some textures are really rough, with huge "peaks and valleys" and, if this is your case, stenciling may not be an option. However, there are light to medium textures that are very suitable for stenciling. With textures it is especially important that you put very little paint on your brush and always off-load it onto a paper towel. Use a rubbing/dabbing motion while stenciling and try not to force the paint under the edges of the stencil. You can also use a dense foam roller, but make sure that you off-load it onto some paper towels so that it is relatively dry. To avoid seepage, use very little paint, and don't press hard on the roller. Using spray adhesive can also help prevent seepage of paint under the stencils. We love Elmer's re-positionable spray adhesive but most re-positionable spray adhesives are fine. Always test the stencil on a disposable surface first (such as a piece of cardboard), or try stenciling a small area in a corner somewhere and immediately wipe the stenciled paint off the wall with a moist baby wipe. Also, it's good to remember that using high-contrast colors (like black over white) is much less forgiving than using colors that are similar to each other. SPRAY ADHESIVE: We find that it is not necessary to use spray adhesive with our stencils. However, if you want crisper edges or are stenciling with high contrasting colors, please use it (Elmer's spray adhesive seems to be the best). It is helpful for beginners to mist a stencil with spray adhesive just to make sure you get great results. Always use pieces of blue painters tape to secure your stencil in place. STENCILING FABRIC: You can create custom stenciled curtains, pillows and tablecloths with our stencils! When stenciling on fabric, stencil adhesive is very helpful. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. Use stencil brushes, or roller, and add some textile medium (sold in craft stores) to your acrylic paint. You can also get a special fabric paint, but, frankly, good craft acrylics with a dollop of textile medium work just as well, and costs way less too! :) Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20 seconds (more or less) on a LOW setting through a piece of cloth. Heat-setting will cure the paint and prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. We've stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture. To learn the necessary stenciling techniques to complete your stencil project, take a look at our Illustrated STENCILING INSTRUCTIONS on our website: http://www.cuttingedgestencils.com/stenciling-instructions.html Also, please make sure to watch our step-by-step stenciling VIDEOS. https://www.cuttingedgestencils.com/how-to-stencil-videos.html You'll find these short free video tutorials extremely helpful for your stenciling project. Even beginners get great results! Visit our Facebook page and become our fan :) We have a huge following with 165,000 fans and growing! Lots of inspiring project pictures from DIY-ers just like you, plus contests, special offers and more! - https://www.facebook.com/Cutting.Edge.Stencils Our professional decorative company, Specfin Designs, has been a leader in faux painting for over 20 years in the NYC/NJ Metropolitan area. We have hundreds of original hand drawn designs that we have turned into well-engineered, sturdy stencils that are easy and fun to use. For over 20 years we painted, faux finished, plastered and stenciled in hundreds of upscale homes in the New York Metropolitan area, as well as other locations around the country. So when we say, "We know decorative painting and stenciling," we really mean it :) You can see many beautiful examples of our work by visiting http://www.specfindesigns.com YOU ARE WELCOME TO BROWSE OUR EXTENSIVE PORTFOLIO AND USE IT FOR YOUR INSPIRATION! WE COMBINE SHIPPING! BUY MORE AND SAVE! WE ONLY SHIP WITH PRIORITY MAIL TO ENSURE SPEEDY DELIVERY ON DOMESTIC AND INTERNATIONAL ORDERS. ATTENTION INTERNATIONAL CUSTOMERS: Your order may be subject to import duties, custom tariffs or VAT charges, all of which are the responsibility of the recipient. They vary greatly from country to country and we strongly suggest you check your country?s customs policy before placing your order with us. If any package is refused or undeliverable, the original shipping cost is non-refundable. THANK YOU AND PLEASE COME AGAIN SOON! Copyright 2008-18 Innovative Art Concepts, LLC. All rights reserved. Cutting Edge Stencils is a trademark of Innovative Art Concepts, LLC