Power Cord for Sanyo Rice Cooker Steamer and similar items

This listing is for a "2-pin Power Cord" This power cord fits the Sanyo Rice Cooker Food Steamer Model Numbers Made in Japan: EC-5 That is made in Japan. EC-13 That is made in Japan. EC-23 That is made in Japan. EC-73 That is made in Japan. Does not fit models made in Malaysia that are typically missing the dash - between the letters and numbers. Example: EC23 Made in Malaysia instead of EC-23 Made in Japan. The female end of this cord that plugs into your appliance attaches to 2 round prongs. (Cords for use in United States Power Outlets) ***You may need a power cord converter outside the U.S. If you have any questions, please ask before you "Buy." THANK YOU! Bread Machine Parts Finder ***Important message about this type of power cord: This type of power cord is intended to be attached to the appliance and only removed from the appliance when absolutely necessary. Such as the purpose of cleaning the appliance. You should otherwise always leave the cord attached to the appliance and only unplug the cord from the electrical wall outlet. If you repeatedly remove the cord from the appliance you will cause excessive wear to the compression contacts in the female end of the cord. This will eventually cause a loose connection. A loose connection will cause electrical shorting that will result in the cord getting too hot or a short so severe that it will pop a breaker. This rule applies to the power cord that was issued with your appliance when purchased new as well as this cord that you may be purchasing soon. Many consumers don't know this simple rule and will wear out cords, cause damage to their appliance, or pop breakers. Following this simple rule will increase the life of the power cord as well as the life of the appliance. ***Important message about this type of power cord: *Please note that the first time you attach this cord it has to be forced on to expand the compression contacts. If you need to remove the cord from the appliance it will require some force to remove it. *Remember, each time you install and remove this type of cord you are reducing the life of the cord. (This action is what causes the cord to become loose and eventually no longer function.)(This is one of the most common reasons a consumer needs to purchase a new cord.)