1500W 30A DC-DC Step-up Boost Converter and similar items

1500W 30A DC-DC Step-up Boost Converter 10-60V to 12-90V Power Supply Module Items Description: Module parameters: Module model: SZ-BT07CCCV-D1 Module Name: 1500W Booster Constant Current Module Module nature: Non isolated boost module (BOOST) Input voltage: DC10-60V Input current: 10-30V Input voltage, maximum current 30A 31-60V input voltage, maximum current 25A Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the more static current will increase) Output voltage: 12-90V continuously adjustable (default output is adjusted to 19V for shipment, please specify if it needs to be adjusted to other voltage values. If there is a multimeter, buyers can adjust it themselves) 12-90V fixed output (for bulk customers) Output current: 20A MAX If it exceeds 15A, please strengthen heat dissipation (related to the input and output pressure differences, the larger the pressure difference, the smaller the output current) Constant current range: 0.8-20A (+/-0.3A) Input anti reverse connection: Yes (150A power MOS anti reverse) Low battery protection: with (8-50V adjustable) self recovery type Working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high) Working frequency: 150KHz Conversion efficiency: 92% -97% (efficiency is related to input and output voltage, current, and voltage difference, with low voltage difference and high efficiency) Input overcurrent protection: Yes (if the input exceeds 35A, automatic protection will be provided, and the power supply will not boost) Short circuit protection: With dual short circuit protection (input 30A fuse), it is safer to use. Input reverse protection: Yes (150A power MOS transistor anti reverse. Can be reversed for a long time) Installation method: 4 3mm copper columns Wiring method: Terminal blocks (please use high current pure copper wire) Module size: 130mm in length, 52mm in width, 84mm in height (including copper columns and fans), 130mm in length, 52mm in width, and 67mm in height (excluding copper columns and fans) Output power:=input voltage * 30A, for example: input 12V * 30A=360W, the maximum power at input 12V is 360W Input voltage * 30A, for example: Input 24V * 30A=720W, that is, the maximum power when inputting 24V is 720W Power description: Due to the maximum input current of 30A at 10-30V and 25A at 31-60V, the output power of this power supply is related to the input voltage. The higher the input voltage, the greater the power, (Input voltage * input current equals the overall power) For example, the input 12V * 30A power is 360W. The input 24V * 30A power is 720W. When the input voltage is 36V, the maximum input current is 25A. The maximum power of the power supply is 900W Main advantages: 1. The power supply adopts four 1.2MM pure copper wires made of double iron silicon aluminum. 100V/210A low resistance power MOS, high-power and high current input, suitable for high-power LED and motor use 2. Equipped with input MOS anti reverse connection protection, there is no need to worry about the input connection burning out the power supply instead 3. Low battery protection will not damage the power module and battery due to excessive battery discharge when using battery input. 5. Thickened radiator and intelligent temperature controlled fan for heat dissipation. Voltage regulation: When the power supply is connected and unloaded, use a flat screwdriver to adjust the output terminal "V-ADJ" potentiometer (as shown in the figure below) clockwise to increase and counterclockwise to decrease. Due to the large output capacitor capacity, the response will be slower when adjusting the output voltage from high voltage to low voltage. The adjustment range of the instrument is smaller. (The default output voltage is adjusted to 19V for shipment. If you need us to adjust other voltage values, please explain or leave a message) Current regulation: Turn the "CC A-ADJ" potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect a load such as an LED battery, and adjust the "CC A-ADJ" potentiometer clockwise to the current you need. For battery charging, after discharging the battery, connect it to the output and adjust CC A-ADJ to the current you need. When charging, be sure to use the discharged battery to adjust it accurately, because the more remaining battery charge, the lower the charging current. The default output power is adjusted to 3A for shipment. If we need to adjust the current value properly, please do not use short-circuit output to adjust the current. The circuit structure of the boost module cannot be adjusted through short-circuit, Input low battery protection adjustment: Low battery protection is mainly aimed at preventing battery over discharge when the input power supply is a battery. Low voltage protection should also be set when the battery voltage is too low to damage the power module and when the battery input is a switching power supply Method 1: For example, set 12V battery low battery protection. Connect a 10V voltage to the input terminal of the power module and use a flat screwdriver to adjust RV1 (increase the clockwise protection voltage value and decrease the counterclockwise protection voltage value) until the UVLO light is on. At this time, the low battery protection voltage is 10V. When the battery voltage drops to 10V, the power module does not rise (the input voltage is equal to the output voltage). Only when the input voltage is higher than 10V, the power automatically recovers and starts boosting. Method 2: Connect the input battery or switch power supply. If the UVLO light on the board is off, turn the RV1 potentiometer counterclockwise to turn the UVLO light on. After turning it on, turn it clockwise for two more turns. If the UVLO light is on, turn the RV1 potentiometer clockwise to turn off the UVLO light. After turning it off, turn it two more turns. (Suitable for 8V-45V voltage) Package: Power Supply Module * 1 Shipping Policy: Item will be shipped within 1-5 working days after full payment is received Economy Shipping: 15-50 business days Standard Shipping: 10-35 business days Expedited Shipping: 3-7 business days Note: Average delivery time for reference only, actual time varies for different countries and related to uncontrollable factors such as weather weather / custom and holidays. Terms of Sale: - 30 Days Free Return and Money Back - If you are not satisfied with your purchase, you can return the item with original packaging back to us for full refund, not any re-stock fee, the return cost should be paid by buyer. - If you receive any wrong items, or damage during the transportation or defect items, we will accept the return and pay the return freight, Please noted that the return cost should be prepaid by buyer, we will issue the refund of return cost to buyer after inspecting the faulty item. - Please kindly contact us before return, our representatives will send you the detailed return instruction. - The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses. Customer Service: Contact us if you have a complaint, or plan to leave us a negative or neutral feedback, please contact us and we will be glad to help solve the problem. We reply your message within 24 hours, thank you!