2 RCA to Phoenix Adapters for Genelec and 50 similar items

Two (2) RCA to Phoenix Adapters for Genelec 4020, 4030, and 4040 series* speakers *READ Does NOT include speakers. Only includes items listed below. Not compatible with all versions of these speakers, see below. Exclusively available from RolfTaylor (formerly Rolf.Taylor). These are made by the seller and you will not find them elsewhere. I used to sell on the e place and sold quite a few of them, but no longer sell there due to policy changes. Please don't hesitate to contact me should you have any questions about this handy item. Congratulations, you have discovered that the 4000 series* Genelecs are available used at very good prices and are sonically identical to the corresponding 8000 or G series speaker. But how does one connect those pesky Phoenix connectors to your sound system? Never fear, a solution is here! These adapters plug directly into the Phoenix (Euroblock) connectors on the Genelecs, and provide a standard RCA-type female connector. Your 4000 series* speaker is now equivalent to the corresponding G series home speaker. This sale is for quantity two (2) adapters. These work with the following Genelec Speakers (~1/8" pin spacing) 4020 4020B 4030A 4030B 4040A *NOT ALL 4000 series Genelecs use this connector. In order to use this adapter the spacing between the pins should be just over 1/8" and the pin-out as shown below. Compatible speakers use a 5 pin Phoenix Connector with the following pin-out: ^1 Control ^2 Control 3 Audio (Common) 4 Audio (+) 5 Audio (-) ^Not present on adapter - adapter should be inserted in right-most positions on speaker (pins 3-5). NOTE: 3 pin adapter is designed to connect to pins 3, 4, 5 only. As recommended by Genelec for unbalanced connections, pins 3 and 5 connect to the outside of the RCA with Pin 2 connecting to the center pin. These will NOT work with the 4020C, which uses a different connector. Keep in mind that Phoenix connector pin-outs are not standardized. For that reason, it is unlikely that these adapters will work with devices other than those listed above. Please contact me with details on your equipment if you have questions. NOTE: If you wish to connect your 4020/4020B speakers to the headphone jack of your device, I sell a complete accessory set that allows you to do so. See my other auctions for details. NOTE: The seller is not connected with Genelec Corporation in any way. TIP: Make sure the speakers you buy are rated for 120 Volts for use in the USA. The older Genelec speakers do not have voltage adjustment. If you need these in some other quantity, please contact me about setting up an sale to suit your needs. IMPORTANT STUFF (please read before bidding): I strive for satisfaction. Please read the following to give you realistic expectations as to what I can do for you. Unless otherwise stated, I offer flat rate shipping. Please take the shipping amount into account when bidding - this allows you to know exactly how much you will be paying for the item in total. I accept Paypal ONLY. I ship to the Paypal verified address ONLY. I ship USPS unless you contact me prior to bidding, and I agree to do otherwise (this will likely delay shipment). No shipments outside the 50 states (and DC) of the USA. ONLY exception: If you are on a US military base outside the 50 states contact me with shipping address IN ADVANCE of the auction closing, and I will see if I can do it. In this case the quoted flat rate shipping will not apply. I will bill you the exact USPS charges. I do not ship every day. I ship USPS at least twice a week. So it may take up to 4 days for your order to ship. I usually do better. If you need an item quickly contact me BEFORE bidding for possible other shipping options (flat rate shipping will not apply). If you have negative feedback please don’t bid. Your bid will be canceled. If you will not be paying within 72 hours let me know so there will be no unexpected problem with your feedback. I do not want to give you negative feedback. If you have ANY questions or problems please contact me BEFORE leaving feedback. Please give me the chance to make things right!