PRODUCT DESCRIPTION The G-Series lift tables have been designed as an economical solution for light duty applications. Available with 2,000 3,000 lb. Capacities, the G-Series table can improve productivity and reduce injuries by placing loads at an ergonomic work height. The heavy duty 1. 7 HP lift motor allows up to 12 full lifts per hour on average, with a competitive lift speed and runs on a 115 volt input 15 amp circuit. Available in 4 models, the G-Series has the right table for many applications. The G-Series tables are stock items and can usually ship in 24 hours. The 3G-series lift tables features a 2 lift cylinder for increased capacity and has the same standard features as the 2g models. STANDARD FEATURES Upper Platform Full Perimeter Safety prevents descent upon obstruction Electric circuit reset button in case safety perimeter bar is activated Upper limit switch shuts motor off at full height extension reducing wear Single acting lift cylinder with flow control to prevent fast lowering Low Tension (24v) control box with up and down buttons Lifetime lubricated bearings on lift arms 1.7HP 115V motor with low amp draw and reliable performance Runs on a standard 15 amp circuit SPECIFICATIONS Weight: 400 lb Hand Controls / Foot Controls: Foot Controls LPI Part Number: 2G-2849 Motor HP: 1.7 HP Platform Length: 28 in Platform Width: 49 in Weight Capacity: 2000 lb Lowered Height: 8 in Platform W x L: 49 INCH x 28 INCH Time To Raise: 18.5 sec