the intelix s-v1cp composite video, control and similar items

the intelix s-v1cp composite video, control and power balun transmits composite video, 2 conductor control, and power over a single twisted pair cable. the s-v1cp features one rj45 connector, a male bnc connector, a male mini-din connector and a female mini-din connector, both for power, and two bare wire leads for control. the bnc connector can be used for a direct connection to either a media source or to a display device. used in pairs, s-v1cps effectively replace bulky coaxial cable and use a building's existing cabling network. the s-v1cp conforms to iec 61000-4-2:1995 standards and achieves exceptional interference rejection. it is most ideal for security and monitoring applications with equipment such as cctv cameras, monitors, dvrs, video sequencers, video multiplexers, quads, switchers, and servers. transmits composite video, 2 conductor control, and power over one twisted pair. conforms to iec 61000-4-2:1995 standards and achieves exceptional interference rejection. ideal for security and monitoring applications with equipment such as cctv cameras and monitors. ntelix s-v1cp composite video control and power balun the intelix s-v1cp transmits composite video, two conductor control, and power over a single twisted pair cable, such as cat 5 or cat 6. the s-v1cp features a male bnc connector for direct connection to source and destination devices, as well as male and female din power connectors and two bare control leads. used in pairs, s-v1cp baluns replace bulky coaxial video cable and utilize a building's existing structured cabling network. the s-v1cp conforms to iec 61000-4-2:1995 protection standards and features exceptional interference rejection. s-v1cp baluns are ideal for security and monitoring applications with such equipment as cctv cameras, monitors, dvrs, video sequencers, video multiplexers, quads, switchers, and servers. technical specifications max distance video: 1,000 feet power: 650 feet control: 1,000 feet bandwidth dc to 8 mhz maximum input 1.1 vp-p video signal 1 vp-p, 75 ohms attenuation 1.5 db max impedance 75 ohms insertion loss less than 2 db over the frequency range return loss greater than 15 db over the frequency range common mode rejection greater than 40 db over the frequency range protection 1 kv (common mode) 10/700 us cable cat 5, cat 5e, cat 6, and cat 7 compatible interference rejection yes maximum supported wattage 18 watts maximum supported voltage 48 volts at 15.4 watts supported control rs422, rs485, dc power maximum current 1.0 amps connectors (1) male bnc (1) male mini-din (power) (1) female mini-din (power) (1) two bare wire leads (control) (1) rj45 power connector size 0.215" outer diameter 0.081" inner diameter enclosure abs plastic dimensions 2.5" x 0.75" x 1.38" compliancy fcc, ce, rohs